How To Change Battery In Ford Explorer Key Fob

To change the battery in this Ford key, you will need two CR2025 batteries and a flathead screwdriver. This key play a trick on has been used in Ford Fusion, Mustang, F-150 from 2013 to 2018.

ford key fob battery replacement

Turn the remote over, and on the rear of the remote, printing the release push.
Remove the plastic cover from the remote. Place the dorsum cover to the side. You will not run across the batteries yet.
Insert a flat screwdriver into the slot and twist it to open up the remote. Yous should exist able to pry the two parts of the keyfob.
Now you should be able to run into the two coin cell batteries.
Remove the kickoff battery. Underneath information technology, y'all will see a white piece of paper. Remove the paper and pull out the bottom bombardment as well.
Change both batteries. Utilise a flat screwdriver for popping out the batteries.
Slide in two new CR2025 batteries. Make sure that the negative (-) side is facing you lot.
Install the emergency metal key back in place.
Align the ii parts with each other and press them together. The two halves should snap together, as shown in the video above.
Examination the Ford primal play a joke on remote past continuing outside the car and pressing the "Lock" or "Unlock" buttons.

For this Ford key play a joke on, yous will need one CR2032 battery. To larn how to change the battery in this Ford key play a trick on, watch the video or follow the instructions below.

Flip the cardinal on the backside and note the release switch.
Press the release switch and slide out the metal primal with your fingernail.
Use the metallic primal to pry away the back encompass.
Note the bombardment on the dorsum cover. Use a flathead screwdriver to pry out the old bombardment.
Install the new battery with the positive (+) symbol facing the dorsum embrace.
Align the dorsum encompass on the key flim-flam and press information technology on.
Slide the metal key in the primal play a joke on and test the key play a joke on operation.

To change the bombardment in this Ford key, you volition demand a CR2032 battery. Watch the video or follow the instructions beneath for more help.

Use a flat caput screwdriver to pry apart the cover with the Ford logo.
Use the screwdriver to pry out the battery.
Install a new CR2032 bombardment with the positive side facing yous.
Align the two halves of the key and press them together until they close.

These instructions utilize to many models, such equally Ford cars and trucks.

These instructions assistance owners of Ford and Lincoln vehicles such as the Focus, Fiesta, C-Max, Mustang, Escape, Transit Connect, Edge, Flex, Explorer, Expedition, Taurus, F-150, EcoSport, MKC, MKZ, MKS, MKX, MKT, and the Navigator.